YI-16SA2F4 Firmware Firmware version : V1.39 2006-03-09 BOOT ROM Version : V1.39 2005-12-06 Agilent TSDK Firmware Version:V3.4 file name : AXS7520BOOT.BIN ==> BOOT Code : AXS7520FIRM.BIN ==> Firmware : AXS7520MBR0.BIN firmware build : 03/09/2006 firmware release date : 03/28/2006 Release Note (V1.39 2006-03-09): First release official firmware for AXS-7520 ``````````````````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Firmware version : V1.40 2006-4-21 BOOT ROM Version : V1.40 2006-4-21 file name : AXS7520FIRM.BIN ==> Firmware AXS7520BOOT.BIN ==> BOOT Code AXS7520MBR0.BIN ==> Main boot record firmware build : 04/21/2006 firmware release date : 05/16/2006 Release Note (V1.40 2006-04-21): 2005-12-22 1 Add SMART_HDD_TEMP_SETTING for AXS6020 2005-12-23 1 (A)Fix TCP thread, enable listening HTTP and telnet port (origial bug is : only listen after 1st access) (B)Sync received timeout set to 20 seconds, others timeout set to 60 seconds (C)Retry 60 seconds, if failed, reset tcp connection (D)Add timeout for GetSmtpPacket, timeout time 30 seconds (E)Add timeout for mail connection close, timeout time 30 seconds 2005-12-27 1 Fix Windows DHCP problem 2 NEW_BATTERY_BACKUP_SUPPORT 2005-12-30 1 Fix AXS8560 I2C retry problem (A) I2C clock slow down to 39KHz (B) I2C Isr must use ppcMbar to guarantee write request is completed 2 AXS battery backup implementation 2006-1-4 1 NEW_BATTERY_BACKUP_SUPPORT for host adapter 2 Fix 2HDD system, create raid volume, no init cannot be select 3 Fix AXS8560 problem, IP/DHCP changed, no DCHP re-scan 4 Add ResetConnection every time DHCP in invoked 2006-1-6 1 If device is forced to ATA150 mode, device may go into partial power management mode program the PHYControl to let the PHY to go out of PARTIAL power mode (6081/6041 only) 2006-1-11 1 Add ResetChannel in CheckChannel to avoid HDD cannot be detected 2 If no HDD is detected(phyStatus == 0), reset PHY 2 more times 2006-1-13 1 Fix SCSI Inquiry Serial # is filled with 8 leading space 2006-1-16 1 Fix PassThrough in CheckVolumeX, passthrough cannot over 0x100 blocks 2006-1-23 1 Fix LeVeL2ReScUe to recover failed volume status and reSIGNAT 2 Add CREATE_RAID_WITHOUT_DEL_VOL to recover volume and raid table from original disks 2006-1-24 1 Modify FAN warning RPM to 1500 (original 1900RPM) 2 Fix WDC WD1500ADFD-00NLR0 startup problem, this drive if connected with SATA power connector, drive cannot be detected 2006-1-26 1 Fix AXS6020/7020 Fan speed control error 2 Change AXS6020/7020 controller warning temp to 65 2006-2-10 1 Add SPIN_DOWN_IDLE_HDD for VTL application 2006-2-22 1 Fix nmap 4.01 wincap 3.1 and server2003+SP1 nmap -v 192.168.0.xxx will hang the HTTP/Telnet connect 2006-2-27 1 Add display of RAID set power state in HTTP 2006-3-15 1 Add Event and warning if incomplete RAID Set discovered (LOG_EVENT_FOR_INCOMPLETE_RAID) 2006-3-17 1 Fix set logo from ethernet 2006-3-21 1 Fix Level2Rescue to include failed drive for raidset 2006-3-23 1 Disable the modification of volume capacity if any volume is migrating or need migration in the same raidset to avoid mistake 2006-3-30 1 Fix AXS8560 gal green LED to always on 2006-3-31 1 Fix WD4000YR problem in AXS8560, may have power on/off during hdd detection 2 If queue depth field is 0, disable NCQ 2006-4-7 1 Fix ReconfigBar1Sata from config write interrupt, system may hang in some MB 2006-4-18 1 Fix POWERPC MBR0_VER_LOC (not at offset 0xFCC but at 0x0C) 2 Add LOCK_FLASH_ACCESS to lock flash to prevent concurrent access 3 Add Chevelon speed detection by using performance monitor 4 Add HASH_ENTRY to 32K to support 2GB cache memory 5 Improve migration point record (A) Add new event for rebuilding/initialization/migration <1> completion (complete normally) <2> aborted (interrupted and do not need to restart, ex. raid5 init and fail one drive, init abort) <3> stopped (interrupted and need to restart, ex. raid5 rebuilding and failed another disk, and system failed, user need to make the raid5 volume to revive) (B) Power loss event during migration/rebuilding/initialization The LBA address is logged for reference (C) Power loss and migration and some drive cannot detected after power recover, system halt and the LBA logged. User need to recover this state to normal or the migration point may lost and corrupt the system. 6 New volume check function (HTTP only) (A) User can select multiple volume to check one time (B) User can select to SCRUB bad block or REPAIR parity or not 2006-4-21 1 Fix ResSemaGive (go not decrement semaCount, SemaTake already decrement) 2 Increment largeCacheArray to 8 3 For IOP321+4G fibre version, all default logo is removed 4 Add NO_INIT_RAID1356 (for rescue volume set) 5 Add OPTIMIZED_FOR_AV_REC for AV recording performance 6 Add LOG_EVENT_FOR_INCOMPLETE_RAID 7 Build V1.40 2006-4-21 ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Firmware version : V1.41 2006-05-24 BOOT ROM Version : V1.41 2006-05-24 Agilent TSDK:V4.0 file name : AXS7520FIRM.BIN ==> Firmware AXS7520BOOT.BIN ==> BOOT Code AXS7520MBR0.BIN ==> Main boot record firmware build : 05/24/2006 firmware release date : 07/10/2006 Release Note (V1.41 2006-05-24): 2006-4-24 1 PPC8560:add 2GB support 2006-5-9 1 Fix SNMP power state item for no power state detection 2006-5-10 1 Fix IdeErrorHandler for HDD with error and in heavy loading 2006-5-11 1 PPC8560:fix array hang intermittently(compiler problem) 2006-5-17 1 Fix after raid expansion, some data is not updated correctly 2 Fix RaidSet Expansion problem, if multiple volumes are created on the same raidset, and raid expansion is done for some volumes and power fail or restart system, the expanded volume cannot be accessed or data may corrupt and need to retart the system after all migration is done for system to operate correctly. (add two fields in volumesetdata) 3 Fix InitVolume cross link error, if OPT_MIRROR_RANDOM_READ 2006-5-18 1 PPC8560:disable unalignment access exception 2 PPC8560:enable L2 if PPC PVR nibble0 >= 2 3 Fix HTTP volume creation when in degarded mode, prevent creation of volume in degraded mode 4 Add supporting of SCB_PIO_WRITE for multiple blocks 2006-5-19 1 Fix RAIDSET expasion requirement raidset allowed to expansion (A) RaidSet must be complete (B) All volume in this raid set must be normal state 2 UPDATE_HDD_MICROCODE for HGST HD (use standard ATA command 0x92) 2006-5-22 1 75X0:modify to support larger flash in AGILENT DX4 adapter for 512KB (A)FIRMWARE_SIZE set to 0xA0000 (640K) (D)internal model set to 75X1 for transitional version (E)V1.40-V1.41 Conversion 2 Final version of 75X0 (A)Boot code should be modified to read from DX4 adapter and 2nd image (B)firmware is set to 75X1 (both internal and header) (C)Use TSDK 4.0 (D)modify ROM.CFG 2006-5-24 1 Build V1.41 2006-5-24 ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2EF4 Firmware Firmware version : V1.42 2006-10-13 File name : AXS7520BOOT.BIN ==>boot code File name : AXS7520firm.BIN ==>Firmware File name : AXS7520MBR0.BIN ==> Main boot record Firmware build : 10/13/2006 Firmware release date : 11/28/2006 Release Note (V1.42 2006-10-13): 1. Fix SilkWorm 200E Fibre Switch compatible issue. ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Firmware version : V1.45 2008-03-14 BOOT ROM Version : V1.45 2008-03-14 File Name : AXS7520FIRM.BIN ==> Firmware V1.45 2008-03-14 AXS7520BOOT.BIN ==> BOOT Code V1.45 2008-03-14 AXS7520MBR0.BIN (Agilent TSDK V4.0) Firmware Build : 03/14/2008 Firmware Release Date : 05/30/2008 Release Note (V1.45 2008-03-14): 1. Add OffLine RaidSet (A) All function is the same as delete raidset except (B) No writing of raidconfig (C) New HDD state:DEV_OFFLINE (D) Spin Down HDD (E) HDD fault LED is flashing to indicate the user the correct HDD for Removing 2. Add SUPPORT_DHCP_HOST_NAME for named DHCP server ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Firmware version : V1.45 2008-06-13 BOOT ROM Version : V1.45 2008-06-13 File Name : AXS7520FIRM.BIN ==> Firmware V1.45 2008-06-13 AXS7520BOOT.BIN ==> BOOT Code V1.45 2008-06-13 AXS7520MBR0.BIN (Agilent TSDK V4.0) Firmware Build : 06/13/2008 Firmware Release Date : 08/06/2008 Release Note (V1.45 2008-06-13): 1. Fix BBM problem (Raid system power on will start POST, when system not yet ready then turn off raid system some time BBM will active, next power on cycle raid system will run to recover data procedure and can not start up to normal mode) ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Update, Firmware version V1.46 2009-02-06 Release Note : Firmware version : V1.46 2009-01-06 File name : AXS7520BOOT.BIN „» Boot Code V1.46 2009-01-06 File name : AXS7520FIRM.BIN „» Firmware V1.46 2009-02-06 File name : AXS7520MBR0.BIN (Agilent TSDK V4.0) Firmware Build : 02/06/2009 Firmware Release Date : 03/03/2009 Release Note (V1.46 2009-02-06): 1. Fix NTP YY/MM/DD error after YEAR2009. ````````````````````````````````````````````````````````````````````````````````````````````````````` YI-16SA2F4 Firmware Update, Firmware version V1.48 2010-01-19 Release Note : Firmware version : V1.48 2010-01-19 File name : AXS7520BOOT.BIN „» Boot Code V1.48 2010-01-04 File name : AXS7520FIRM.BIN „» Firmware V1.48 2010-01-19 File name : AXS7520MBR0.BIN (Agilent TSDK V4.0.2) Firmware Build : 01/19/2010 Firmware Release Date : 03/01/2010 Release Note (V1.48 2010-01-19): 1.Add ShutDown Controller function 2.Rebuild all SATA model,All fibre model enable ACL(Access Control List) `````````````````````````````````````````````````````````````````````````````````````````````````````